DIY Battery Holder for 18650’s” class=”bbCodeImage LbImage” alt=”[​IMG]” data-url=”” />

20mm holesaw + drill
20mm chisel
Wood i used is 1.5" x 3" and however long you want.

After marking out the wood for drilling i put a piece of tape on the holesaw an inch from the cutting teeth as a depth gauge for each hole.
Once all holes are drilled take the chisel and insert into the middle of the wood thats…”>diy battery Holder for 18650's

Tired of laying my mods down to charge, so…

the usb is on the bottom and I am tired of removing tank/atty and laying it down to charge…I bought an mp3/ipod charging dock from the dollar store (NOT the apple plug one) and a usb cord (total cost $2.00)..I took it apart and installed the new plug (u have to use a tool to enlarge the hole..I used needle nosed pliers, but keep it a tight fit so it doesn't move)…measure your device height wise with cord so it will stand freely…snap it back together and plug into pc or get a wall wart…”>Tired of laying my mods down to charge, so…

How dumb I have been over the past 5 years of vaping! Watch

Proudly powered by WordPress
Theme: Esquire by Matthew Buchanan.